==========================================================
C71 ONVIF probe v3 start: Thu Jan  1 08:00:04 CST 1970
==========================================================
--- uname ---
Linux closeli 4.4.192V2.1 #1 Mon Aug 23 17:13:18 CST 2021 armv5tejl GNU/Linux
--- free ---
              total        used        free      shared  buff/cache   available
Mem:          31216        6836       19956           8        4424       21988
Swap:             0           0           0
--- payload ---
ls: /mnt/sdcard/manufacture_test/payload/custom: No such file or directory
--- stage payload ---
cp: can't stat '/mnt/sdcard/manufacture_test/payload/custom': No such file or directory
COPY FAILED, try direct run from card
--- stop stock app ---
(empty above = ok)
--- /dev/videoN links ---
crw-rw----    1 root     0          81,   0 Jan  1 08:00 /dev/video-0-0
crw-rw----    1 root     0          81,   1 Jan  1 08:00 /dev/video-0-1
crw-rw----    1 root     0          81,   2 Jan  1 08:00 /dev/video-0-2
lrwxrwxrwx    1 root     0               14 Jan  1 08:00 /dev/video0 -> /dev/video-0-0
lrwxrwxrwx    1 root     0               14 Jan  1 08:00 /dev/video1 -> /dev/video-0-1
lrwxrwxrwx    1 root     0               14 Jan  1 08:00 /dev/video2 -> /dev/video-0-2
--- run rtsp ---
rtsp not executable at /mnt/sdcard/manufacture_test/payload/custom
--- full rtsp output ---
--- dmesg tail ---
ak_camera_probe 725
gc2063_probe Jul  9 2021 18:19:19
of_get_named_gpiod_flags: parsed 'reset-gpio' property of node '/soc/i2c0@20150000/camera@0x30[0]' - status (0)
of_get_named_gpiod_flags: parsed 'pwdn-gpio' property of node '/soc/i2c0@20150000/camera@0x30[0]' - status (-22)
i2c i2c-0: gc2063 Probed success, subdev:c3223a14
sensor_sys_init
Reset MAC controller!
phy read phy id1 waiting ok,data=0x0
phy read phy id2 waiting ok,data=0x128
cdh:id 0x128 set!
read reg 0x00 : 0x1140
read reg 0x50 : 0x27
write reg 0x50 : 0x67
Autonegotiation Complete,loop_count:41989
phy read phy id1 waiting ok,data=0x0
phy read phy id2 waiting ok,data=0x128
Link UP
LPAN Link is with 100M Speed, FULLDUPLEX mode
eth0 owns a shared interrupt on netdev->irq 16
setting up the cable unplug timer0 for mac0
==========================================================
probe v3 done: Thu Jan  1 08:00:10 CST 1970 -> reboot
==========================================================