U-Boot 2010.06-svn4537 (Sep 08 2017 - 06:33:55) DRAM: 1 GiB gBootLogPtr:80b80008. Check spi flash controller v350... Found Spi(cs1) ID: 0xC8 0x40 0x18 0xC8 0x40 0x18 Spi(cs1): Block:64KB Chip:16MB Name:"GD25Q128" partition file version 2 rootfstype squashfs root /dev/mtdblock7 In: serial Out: serial Err: serial TEXT_BASE:81000000 Net: PHY found at 3 Hit any key to stop autoboot: 0 > > help ? - alias for 'help' base - print or set address offset boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootf - boot from flash bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol cfgRestore- erase config and backup partition. cmp - memory compare cp - memory copy crc32 - checksum calculation crypt - crypt erasepart- erasepart exit - exit script false - do nothing, unsuccessfully fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) flwrite - flwrite - write data into FLASH memory fsinfo - print information about filesystems fsload - load binary file from a filesystem image go - start application at address 'addr' help - print command description/usage hwid - hwid - set hardware id and save to flash kload - kload - load uImage file from parttion lip - lip - set local ip address but not save to flash loadb - load binary file over serial line (kermit mode) loady - load binary file over serial line (ymodem mode) logsend - get log buf loop - infinite loop on address range ls - list files in a directory (default /) mac - mac - set mac address and save to flash md - memory display memsize - memsize - set mem size mii - MII utility commands mm - memory modify (auto-incrementing address) mtest - simple RAM read/write test mw - memory write (fill) nm - memory modify (constant address) partition- print partition information ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables rarpboot- boot image via network using RARP/TFTP protocol rdefault- rdefault -recover default env reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sf - SPI flash sub-system showvar - print local hushshell variables sip - sip - set server ip address but not save to flash sleep - delay execution for some time smi - MII utility commands sync_uboot- sync_uboot - sync uboot to uboot-bak test - minimal test like /bin/sh tftpboot- tftpboot- boot image via network using TFTP protocol true - do nothing, successfully uartUp - uartUp- update image via uart using uart4 usleep - delay execution for some time version - print monitor version > printenv bootcmd=kload 0x82000000; bootm 0x82000000 bootdelay=1 baudrate=115200 ipaddr=192.168.1.108 serverip=192.168.1.1 gatewayip=192.168.1.1 netmask=255.255.255.0 bootfile="uImage" wifiaddr= da=tftp 0x82000000 dhboot.bin.img; flwrite;tftp dhboot-min.bin.img;flwrite dr=tftp 0x82000000 romfs-x.squashfs.img; flwrite dk=tftp 0x82000000 kernel.img; flwrite du=tftp 0x82000000 user-x.squashfs.img; flwrite dw=tftp 0x82000000 web-x.squashfs.img; flwrite dp=tftp 0x82000000 partition-x.cramfs.img;flwrite dc=tftp 0x82000000 custom-x.squashfs.img; flwrite up=tftp 0x82000000 update.img; flwrite tk=tftp 0x82000000 uImage; bootm dh_keyboard=1 loglevel=4 pd=tftp 0x82000000 pd-x.squashfs.img; flwrite ethact=gmac BSN= bootargs=mem=85M console=ttyS0,115200 root=/dev/mtdblock7 rootfstype=squashfs HWID=IPC-HDW4431C-A-V3:01:02:06:63:1A:00:01:10:01:00:00:258:00:00:00:00:00:01:00:00:100 devalias=IPC-HDW4433C-A hwidEx=00:03:00:00:00:00:00:00:00:00:00:00:00:00:00:00 appauto=1 autolip=192.168.1.251 mp_autotest=0 filesize=30040 fileaddr=82000000 ID= ethaddr= stdin=serial stdout=serial stderr=serial verify=n ver=U-Boot 2010.06-svn4537 (Sep 08 2017 - 06:33:55) Environment size: 1207/131068 bytes