U-Boot 2013.10.0-AK_V2.0.04 (Apr 08 2021 - 12:40:06)

DRAM:  64 MiB
8 MiB
Create flash partition table init OK!
ANYKA SDHC/MMC4.0: 0
Load Env CRC OK!
In:    serial
Out:   serial
Err:   serial
Net:   AKEthernet-0

Hit any key to stop autoboot:  1 
 0 

anyka$sss   

anyka$

anyka$

anyka$

anyka$help
?       - alias for 'help'
base    - print or set address offset
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
chpart  - change active partition
cmp     - memory compare
cp      - memory copy
crc32   - checksum calculation
devmem  - read or write register, now just read
downimage- downimage   - download and write All-Image to FLASH device,partiton table from ENV partition.
downjffs2fs- load usr.jffs2 tftp
downkernel- load uImage tftp
downrootfs- load root.sqsh4 tftp
downsquashfs- load usr.sqsh4 tftp
downuboot- load uboot tftp
env     - environment handling commands
erase   - erase FLASH memory
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls   - list files in a directory (default /)
flinfo  - print FLASH memory information
format  - erase uboot env
go      - start application at address 'addr'
help    - print command description/usage
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing address)
mmc     - MMC sub system
mmcinfo - display MMC info
mtdparts- define flash/nand partitions
mw      - memory write (fill)
nm      - memory modify (constant address)
parts   - read out partitions table info.
ping    - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
protect - enable or disable FLASH write protection
readcfg - read config from config.
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
sf      - spi flash sub-system:
tfdownjffs2fs- load usr.jffs2TF
tfdownkernel- load uImageTF
tfdownrootfs- load root.sqsh4TF
tfdownsquashfs- load usr.sqsh4TF
tfdownuboot- load u-boot.binTF
tftpboot- boot image via network using TFTP protocol
tfupdateimage- tfupdateimage   - download and write All-Image to FLASH device
updatecfg- update config from config infor table.
version - print monitor, compiler and linker version

anyka$

anyka$

anyka$

anyka$printenv
backuppage=ffffffff
baudrate=115200
boot_normal=readcfg; run read_kernel; bootm ${loadaddr}
bootargs=console=ttySAK0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs init=/sbin/init mem=64M memsize=64M
bootcmd=run boot_normal
bootdelay=1
console=ttySAK0,115200n8
erase_env=sf probe 0:0 ${sf_hz} 0; sf erase 0x20000 0x2000
ethact=AKEthernet-0
ethaddr=<mac:3fd921ea2b3867f4>
fs_addr=0x230000
init=/sbin/init
ipaddr=192.168.1.99
kernel_addr=37000
kernel_size=143988
loadaddr=81808000
memsize=64M
mtd_root=/dev/mtdblock4 
netmask=255.255.255.0
read_kernel=sf probe 0:0 ${sf_hz} 0; sf read ${loadaddr} ${kernel_addr} ${kernel_size}
rootfstype=squashfs
serverip=192.168.1.1
setcmd=setenv bootargs console=${console} root=${mtd_root} rootfstype=${rootfstype} init=${init} mem=${memsize}
sf_hz=20000000
stderr=serial
stdin=serial
stdout=serial
update_flag=0
ver=U-Boot 2013.10.0-AK_V2.0.04 (Apr 08 2021 - 12:40:06)
vram=12M

Environment size: 972/4088 bytes

anyka$

anyka$

anyka$

anyka$version

U-Boot 2013.10.0-AK_V2.0.04 (Apr 08 2021 - 12:40:06)
arm-anykav200-linux-uclibcgnueabi-gcc.br_real (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) 4.8.5
GNU ld (GNU Binutils) 2.24

anyka$

anyka$

anyka$