▒ U-Boot SPL 2013.07 (Jul 01 2022 - 09:47:13) apll_freq = 912000000 mpll_freq = 1100000000 vpll_freq = 1008000000 epll_freq = 1308000000 cpu clk source: apll ddr clk source: mpll DDR clk rate: 550000000 spl_sfc_nand_load:399 00006c00,00064000,80100000 spl_sfc_nand_load:402 image entry point: 0x80100000 Board: ISVP (Ingenic XBurst T40 SoC) DRAM: 128 MiB Top of RAM usable for U-Boot at: 88000000 Reserving 593k for U-Boot at: 87f68000 Reserving 33280k for malloc() at: 85ee8000 Reserving 32 Bytes for Board Info at: 85ee7fe0 Reserving 124 Bytes for Global Data at: 85ee7f64 Reserving 128k for boot params() at: 85ec7f64 Stack Pointer at: 85ec7f48 Now running in RAM - U-Boot at: 87f68000 NAND: 0 MiB SFC_NAND: ***sfc init! MMC: MSC: 0 NAND read: device 0 offset 0x80000, size 0x80000 524288 bytes read: OK crc1_ok is fe70867a, tmp_env1->crc is fe70867a, ENV_SIZE is 7fffc Data transfer: serial Net: Jz4775-9161 Hit any key to stop autoboot: 0 isvp_t40# isvp_t40# help ? - alias for 'help' base - print or set address offset boot - boot default, i.e., run 'bootcmd' boota - boot android system bootd - boot default, i.e., run 'bootcmd' bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol chpart - change active partition cmp - memory compare coninfo - print console devices and information cp - memory copy crc32 - checksum calculation echo - echo args to console env - environment handling commands ethphy - ethphy contrl fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) gettime - get timer val elapsed, go - start application at address 'addr' help - print command description/usage l2cache - allcate L2 cache size loadb - load binary file over serial line (kermit mode) loads - load S-Record file over serial line loady - load binary file over serial line (ymodem mode) loop - infinite loop on address range md - memory display mm - memory modify (auto-incrementing address) mmc - MMC sub system mmcinfo - display MMC info mtdparts- define flash/nand partitions mw - memory write (fill) nand - NAND sub-system nboot - boot from NAND device nm - memory modify (constant address) ping - send ICMP ECHO_REQUEST to network host powerinfo- show regulator output voltage and status printenv- print environment variables reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables sfcnand - sfcnand - SFC_NAND sub-system sleep - delay execution for some time source - run script from memory tftpboot- boot image via network using TFTP protocol ubi - ubi commands ubifsload- load file from an UBIFS filesystem ubifsls - list files in a directory ubifsmount- mount UBIFS volume ubifsumount- unmount UBIFS volume version - print monitor, compiler and linker version watchdog- open or colse the watchdog isvp_t40# printenv BoardType=600304006-BV-T0406 baudrate=115200 bootargs=mem=48M0x0 rmem=65M@0x3000000 nmem=15M@0x7100000 console=ttyS1,115200n8 init=/linuxrc root=/dev/mtdblock3 rootfstype=yaffs2 ro mtdparts=sfc_nand:512k(uboot),512k(env),3M(kernel),20M(rootfs),16M(config),44M(app),-(data) lpj=11968512 bootcmd=nand read 0x80600000 0x100000 0x800000;bootm 0x80600000 bootdelay=1 chiptype=t40 ethact=Jz4775-9161 ethaddr= lenstype=YT_MOTOR_28_120_3013 license= mac= sensortype=gc4663 serialno= stderr=serial stdin=serial stdout=serial uuid= Environment size: 680/524284 bytes isvp_t40# version U-Boot 2013.07 (Jul 01 2022 - 09:47:13) mips-linux-gnu720-gcc (Ingenic r4.0.0-gcc720 2018.02-28) 7.2.0 GNU ld (Ingenic r4.0.0-gcc720 2018.02-28) 2.27 isvp_t40#