U-Boot 2013.10.0-AK_V3.0.06 (May 20 2019 - 15:02:57) DRAM: 64 MiB anyka spi flash. bus_width:1 8 MiB ANYKA SDHC/MMC4.0: 0 anyka spi flash. bus_width:1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: AKEthernet-0 Hit any key to stop autoboot: 1  0 anyka spi flash. bus_width:1 SF: 2097152 bytes @ 0x80000 Read: OK ## Booting kernel from Legacy Image at 81e08000 ... Image Name: Linux-3.4.35 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1412168 Bytes = 1.3 MiB Load Address: 81e08000 Entry Point: 81e08040 Verifying Checksum ... OK XIP Kernel Image ... OK Starting kernel ... U-Boot 2013.10.0-AK_V3.0.06 (May 20 2019 - 15:02:57) DRAM: 64 MiB anyka spi flash. bus_width:1 8 MiB ANYKA SDHC/MMC4.0: 0 anyka spi flash. bus_width:1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: AKEthernet-0 Hit any key to stop autoboot: 1  0 anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$ anyka$help ? - alias for 'help' base - print or set address offset bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol chpart - change active partition cmp - memory compare cp - memory copy crc32 - checksum calculation downimage- downimage - download and write All-Image to FLASH device,partiton table from ENV partition. downjffs2fs- load usr.jffs2 tftp downkernel- load uImage tftp downrootfs- load root.sqsh4 tftp downsquashfs- load usr.sqsh4 tftp downuboot- load uboot tftp env - environment handling commands erase - erase FLASH memory fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) flinfo - print FLASH memory information format - erase uboot env go - start application at address 'addr' help - print command description/usage loop - infinite loop on address range md - memory display mm - memory modify (auto-incrementing address) mmc - MMC sub system mmcinfo - display MMC info mtdparts- define flash/nand partitions mw - memory write (fill) nm - memory modify (constant address) parts - read out partitions table info. parts_adjust- adjust parts info. Each part's size,offset etc. ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables protect - enable or disable FLASH write protection readcfg - read config from config. reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables setloadaddr- set loadaddr to config infor . sf - spi flash sub-system: tfdownjffs2fs- load usr.jffs2TF tfdownkernel- load uImageTF tfdownrootfs- load root.sqsh4TF tfdownsquashfs- load usr.sqsh4TF tfdownuboot- load u-boot.binTF tftpboot- boot image via network using TFTP protocol tfupdateimage- tfupdateimage - download and write All-Image to FLASH device updatecfg- update config from config infor table. version - print monitor, compiler and linker version anyka$h printenv baudrate=115200 boot_normal=run read_kernel; bootm ${loadaddr} bootargs=console=ttySAK0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs init=/sbin/init mem=64M memsize=64M mtdparts=spi0.0:384K@0K(boot),64K@384K(ENV),64K@448K(MAC),1536K@512K(KERNEL),1024K@2048K(ROOT),4608K@3072K(USR.SQUASH),512K@7680K(USR.JFFS2) bootcmd=run boot_normal bootdelay=1 console=ttySAK0,115200n8 erase_env=sf probe 0:0 ${sf_hz} 0; sf erase 0x20000 0x2000 ethact=AKEthernet-0 ethaddr= fs_addr=0x370000 init=/sbin/init ipaddr=192.168.1.99 kernel_addr=0x80000 kernel_size=0x200000 loadaddr=0x81E08000 memsize=64M mtd_root=/dev/mtdblock4 netmask=255.255.255.0 read_kernel=sf probe 0:0 ${sf_hz} 0; sf read ${loadaddr} ${kernel_addr} ${kernel_size} rootfstype=squashfs serverip=192.168.1.1 setcmd=setenv bootargs console=${console} root=${mtd_root} rootfstype=${rootfstype} init=${init} mem=${memsize} sf_hz=20000000 stderr=serial stdin=serial stdout=serial update_flag=0 ver=U-Boot 2013.10.0-AK_V3.0.06 (May 20 2019 - 15:02:57) vram=12M Environment size: 1087/65528 bytes anyka$version U-Boot 2013.10.0-AK_V3.0.06 (May 20 2019 - 15:02:57) arm-anykav200-linux-uclibcgnueabi-gcc.br_real (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) 4.8.5 GNU ld (GNU Binutils) 2.24 anyka$