U-Boot 2014.04 (Dec 07 2022 - 10:37:08) CPU: XM530V200WX1 DRAM: 64 MiB MMC: arasan: 0 In: serial Out: serial Err: serial Net: PHY id1 937c id2 4024 dwmac.10010000 Press Ctrl+C to stop autoboot Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: Password: ************ U-Boot> printenv appCloudExAbility=fHwFcQ3XTmM= appNetIP=0x8801A8C00x00FFFFFF0x0101A8C0 appProducerID=000 baudrate=115200 bootargs=mem=42M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=cramfs mtdparts=xm_sfc:256K(boot),1536K(kernel),1280K(romfs),4544K(user),256K(custom),320K(mtd) bootcmd=sf probe 0;sf read 80007fc0 40000 180000;bootm 80007fc0 bootdelay=1 cramfsaddr=0x60040000 da=mw.b 0x81000000 ff 800000;tftp 0x81000000 u-boot.bin.img;sf probe 0;flwrite dc=mw.b 0x81000000 ff 800000;tftp 0x81000000 custom-x.cramfs.img;sf probe 0;flwrite dd=mw.b 0x81000000 ff 800000;tftp 0x81000000 mtd-x.jffs2.img;sf probe 0;flwrite dr=mw.b 0x81000000 ff 800000;tftp 0x81000000 romfs-x.cramfs.img;sf probe 0;flwrite du=mw.b 0x81000000 ff 800000;tftp 0x81000000 user-x.cramfs.img;sf probe 0;flwrite dw=mw.b 0x81000000 ff 800000;tftp 0x81000000 web-x.cramfs.img;sf probe 0;flwrite ethact=dwmac.10010000 ethaddr= ipaddr=192.168.1.10 netmask=255.255.255.0 serverip=192.168.1.107 stderr=serial stdin=serial stdout=serial tk=mw.b 0x81000000 ff 800000;tftp 0x81000000 uImage; bootm 0x81000000 ua=mw.b 0x81000000 ff 800000;tftp 0x81000000 upall_verify.img;sf probe 0;flwrite up=mw.b 0x81000000 ff 800000;tftp 0x81000000 update.img;sf probe 0;flwrite verify=n Environment size: 1301/65532 bytes U-Boot> version U-Boot 2014.04 (Dec 07 2022 - 10:37:08) arm-xmv2-linux-gcc (Buildroot 2014.08) 4.9.2 GNU ld (GNU Binutils) 2.24 U-Boot> help ? - alias for 'help' base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd' bootd - boot default, i.e., run 'bootcmd' bootm - boot application image from memory bootp - boot image via network using BOOTP/TFTP protocol cmp - memory compare coninfo - print console devices and information cp - memory copy cramfsload- load binary file from a filesystem image cramfsls- list files in a directory (default /) crc32 - checksum calculation dhcp - boot image via network using DHCP/TFTP protocol echo - echo args to console editenv - edit environment variable env - environment handling commands fatinfo - print information about filesystem fatload - load binary file from a dos filesystem fatls - list files in a directory (default /) flwrite - SPI flash sub-system fverify - SPI flash crc check go - start application at address 'addr' help - print command description/usage imxtract- extract a part of a multi-image itest - return true/false on integer compare loadb - load binary file over serial line (kermit mode) loadx - load binary file over serial line (xmodem mode) loady - load binary file over serial line (ymodem mode) loop - infinite loop on address range md - memory display mm - memory modify (auto-incrementing address) mmc - MMC sub system mmcinfo - display MMC info mw - memory write (fill) nm - memory modify (constant address) ping - send ICMP ECHO_REQUEST to network host printenv- print environment variables reset - Perform RESET of the CPU run - run commands in an environment variable saveenv - save environment variables to persistent storage setenv - set environment variables setexpr - set environment variable as the result of eval expression sf - SPI flash sub-system sleep - delay execution for some time source - run script from memory tftpboot- boot image via network using TFTP protocol version - print monitor, compiler and linker version U-Boot> setenv xmuart nfsc 0 U-Boot> boot SF: 1572864 bytes @ 0x40000 Read: OK ## Booting kernel from Legacy Image at 80007fc0 ... Image Name: Linux-3.10.103+ Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1429968 Bytes = 1.4 MiB Load Address: 80008000 Entry Point: 80008000 XIP Kernel Image ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. Booting Linux on physical CPU 0x0 Linux version 3.10.103+ (wangyaming@localhost.localdomain) (gcc version 4.9.2 (Buildroot 2014.08) ) #21 SMP Mon Apr 10 11:30:50 CST 2023 CPU: ARMv7 Processor [410fc051] revision 1 (ARMv7), cr=10c53c7d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: xm530v200 Memory policy: ECC disabled, Data cache writealloc PERCPU: Embedded 7 pages/cpu @c044f000 s6336 r8192 d14144 u32768 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 10668 Kernel command line: mem=42M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=cramfs mtdparts=xm_sfc:256K(boot),1536K(kernel),1280K(romfs),4544K(user),256K(custom),320K(mtd) PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 42MB = 42MB total Memory: 38480k/38480k available, 4528k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc3000000 - 0xff000000 ( 960 MB) lowmem : 0xc0000000 - 0xc2a00000 ( 42 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc0390e34 (3620 kB) .init : 0xc0391000 - 0xc03b38c0 ( 139 kB) .data : 0xc03b4000 - 0xc03d7c20 ( 144 kB) .bss : 0xc03d7c20 - 0xc03f35c4 ( 111 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:128 sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms Calibrating delay loop... 298.59 BogoMIPS (lpj=1492992) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok Setting up static identity map for 0xc031dd68 - 0xc031ddc0 L310 cache controller enabled l2x0: 8 ways, CACHE_ID 0x410000c9, AUX_CTRL 0x32420000, Cache size: 131072 B CPU1: Booted secondary processor Brought up 2 CPUs SMP: Total of 2 processors activated (598.42 BogoMIPS). CPU: All CPU(s) started in SVC mode. NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations Serial: AMBA PL011 UART driver uart:0: ttyAMA0 at MMIO 0x10030000 (irq = 32) is a PL011 rev1 console [ttyAMA0] enabled uart:1: ttyAMA1 at MMIO 0x10040000 (irq = 33) is a PL011 rev1 uart:2: ttyAMA2 at MMIO 0x10050000 (irq = 34) is a PL011 rev1 bio: create slab at 0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Switching to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 512 (order: 0, 4096 bytes) TCP bind hash table entries: 512 (order: 0, 4096 bytes) TCP: Hash tables configured (established 512 bind 512) TCP: reno registered UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.22) msgmni has been set to 75 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered dma-pl330 dma-pl330: Loaded driver for PL330 DMAC-267056 dma-pl330 dma-pl330: DBUFF-32x8bytes Num_Chans-4 Num_Peri-24 Num_Events-4 uart-pl011 uart:0: no DMA platform data uart-pl011 uart:1: no DMA platform data uart-pl011 uart:2: no DMA platform data brd: module loaded XMSFCV2: flash name:XM25QH64C size:0x800000 6 cmdlinepart partitions found on MTD device xm_sfc 6 cmdlinepart partitions found on MTD device xm_sfc Creating 6 MTD partitions on "xm_sfc": 0x000000000000-0x000000040000 : "boot" 0x000000040000-0x0000001c0000 : "kernel" 0x0000001c0000-0x000000300000 : "romfs" 0x000000300000-0x000000770000 : "user" 0x000000770000-0x0000007b0000 : "custom" 0x0000007b0000-0x000000800000 : "mtd" PPP generic driver version 2.4.2 NET: Registered protocol family 24 usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver rndis_host XMMMAC driver: platform registration... done! eth0 - (dev. name: xmmaceth - id: -1, IRQ #35 IO base addr: 0xfe010000) libphy: XMMMAC MII Bus: probed eth0: PHY ID 937c4024 at 0 IRQ 0 (0:00) eth0: PHY ID 937c4024 at 1 IRQ 0 (0:01) active usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usbserial usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver qcserial usbserial: USB Serial support registered for Qualcomm USB modem TCP: cubic registered NET: Registered protocol family 17 Key type dns_resolver registered VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1 registered taskstats version 1 VFS: Mounted root (cramfs filesystem) readonly on device 31:2. Freeing unused kernel memory: 136K (c0391000 - c03b3000) mount: mounting /dev/mtdblock3 on /usr failed: Device or resource busy jffs2: Empty flash at 0x00024c60 ends at 0x00024f50 MEM_START=0x82a00000 MEM_LEN=0x01600000 [reg] = 0x20000000,[val]= 0x00000001 [reg] = 0x20000054,[val]= 0x00000703 [reg] = 0x20000074,[val]= 0xc103c103 [reg] = 0x20000078,[val]= 0xc103c0ff [reg] = 0x2000007c,[val]= 0x0000c107 [reg] = 0x20000000,[val]= 0x00000000 [reg] = 0x20050490,[val]= 0x00000001 [reg] = 0x20050540,[val]= 0x00000001 [reg] = 0x200505f0,[val]= 0x00000001 i2c: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint i2c init is ok! mmz: init ok start=0x82a00000, size=0x1600000 IspKo: build: Jun 14 2023 19:36:53 hevc init [buid Dec 6 2022 10:03:10]... jpeg init...buid:Sep 19 2022 16:14:19 xm_wdt init is ok! insert audio acodec init is ok! arasan_set_clock: new freq 400000 mmc0: driver initialized... IRQ: 74, Base addr 0xc3a00000 arasan_set_clock: new freq 300000arasan_set_clock: new freq 200000dwc2 dwc2.0: dwc2_check_params: Invalid parameter host_nperio_tx_fifo_size=512 dwc2 dwc2.0: DWC OTG Controller dwc2 dwc2.0: new USB bus registered, assigned bus number 1 dwc2 dwc2.0: irq 76, io mem 0x50300000 arasan_set_clock: new freq 195312usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: DWC OTG Controller usb usb1: Manufacturer: Linux 3.10.103+ dwc2_hsotg usb usb1: SerialNumber: dwc2.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected usbwifi_init. PDN pin is low, ouput high and delay 2 sec. gpio:163 : 0x0 LibCrypto : eBootType:0. CryptoDecrypt,565 or_sel=1 LibCrypto : g_cryptotype = 2, flash CryptoDecrypt,565 or_sel=1 json file /mnt/custom/CustomConfig/Device_3001.json LibCrypto : g_cryptotype mem= 2, flash CryptoDecrypt,565 or_sel=1 json file /mnt/custom/CustomConfig/Device_3001.json LIBDVR : FILE -> src/init/json.c, LINE -> 154: Get NoEth0 object error! Device: X2-WE; APName: camera_; WifiType: XM713G ;NoEth0: 0 GPIO: AoEn=162,WifiPdn=163,WifiSwitch=255,Key=161,Red=255,Green=255,ethnetphyled=[255, 255], ProductTest=255 Motor: support=1, mirror=0, flip=0, uart=0, at=0 LED: support=1, enable=0 Alarm: innum=0, outnum=1, in=[0,0,0,0,0,0,0,0],out=[91,0,0,0,0,0,0,0] Feed: reckey=255, feedkey=255, motforward=255 motreverse=255 pwrdetect=255 pwrstatus:52~40  Wifiscan: Txpower:0 ********************************************************************** | SYSTEM INFO | ID: 0x3001 | product type: X2-WE | DSP chip: XM530 | wifi type: XM713G ********************************************************************** LIBDVR: Complied at Jun 17 2023 14:27:18 GIT:552bb59 LIBDVR : FILE -> src/init/json.c, LINE -> 154: Get NoEth0 object error! Device: X2-WE; APName: camera_; WifiType: XM713G ;NoEth0: 0 GPIO: AoEn=162,WifiPdn=163,WifiSwitch=255,Key=161,Red=255,Green=255,ethnetphyled=[255, 255], ProductTest=255 Motor: support=1, mirror=0, flip=0, uart=0, at=0 LED: support=1, enable=0 Alarm: innum=0, outnum=1, in=[0,0,0,0,0,0,0,0],out=[91,0,0,0,0,0,0,0] Feed: reckey=255, feedkey=255, motforward=255 motreverse=255 pwrdetect=255 pwrstatus:52~40  Wifiscan: Txpower:0 ********************************************************************** | SYSTEM INFO | ID: 0x3001 | product type: X2-WE | DSP chip: XM530 | wifi type: XM713G ********************************************************************** LIBDVR: Complied at Jun 17 2023 14:27:18 GIT:552bb59 LIBDVR : Set Ip Successful "netinit help" for help eth0: MAC: <> IP: <192.168.1.136> netmask: <255.255.255.0> LIBDVR : Set Ip Successful LIBDVR : Set NetMask Successful Gateway: <192.168.1.1> LIBDVR : SetGateWay Successful LibCrypto : g_cryptotype mem= 2, flash CryptoDecrypt,565 or_sel=1 json file /mnt/custom/CustomConfig/Device_3001.json LIBDVR : FILE -> src/init/json.c, LINE -> 154: Get NoEth0 object error! Device: X2-WE; APName: camera_; WifiType: XM713G ;NoEth0: 0 GPIO: AoEn=162,WifiPdn=163,WifiSwitch=255,Key=161,Red=255,Green=255,ethnetphyled=[255, 255], ProductTest=255 Motor: support=1, mirror=0, flip=0, uart=0, at=0 LED: support=1, enable=0 Alarm: innum=0, outnum=1, in=[0,0,0,0,0,0,0,0],out=[91,0,0,0,0,0,0,0] Feed: reckey=255, feedkey=255, motforward=255 motreverse=255 pwrdetect=255 pwrstatus:52~40  Wifiscan: Txpower:0 ********************************************************************** | SYSTEM INFO | ID: 0x3001 | product type: X2-WE | DSP chip: XM530 | wifi type: XM713G ********************************************************************** LIBDVR: Complied at Jun 17 2023 14:27:18 GIT:552bb59 dvrHelper version: Jun 7 2023 LIBDVR : Get xmauto Fialed ,xmauto = 1 LibCrypto : g_cryptotype mem= 2, flash CryptoDecrypt,565 or_sel=1 json file /mnt/custom/CustomConfig/Device_3001.json LIBDVR : FILE -> src/init/json.c, LINE -> 154: Get NoEth0 object error! Device: X2-WE; APName: camera_; WifiType: XM713G ;NoEth0: 0 GPIO: AoEn=162,WifiPdn=163,WifiSwitch=255,Key=161,Red=255,Green=255,ethnetphyled=[255, 255], ProductTest=255 Motor: support=1, mirror=0, flip=0, uart=0, at=0 LED: support=1, enable=0 Alarm: innum=0, outnum=1, in=[0,0,0,0,0,0,0,0],out=[91,0,0,0,0,0,0,0] Feed: reckey=255, feedkey=255, motforward=255 motreverse=255 pwrdetect=255 pwrstatus:52~40  Wifiscan: Txpower:0 ********************************************************************** | SYSTEM INFO | ID: 0x3001 | product type: X2-WE | DSP chip: XM530 | wifi type: XM713G ********************************************************************** LIBDVR: Complied at Jun 17 2023 14:27:18 GIT:552bb59 Auto login as root ... (none) login: LIBDVR_PTHREAD - rtc_sys: TID=501 LIBDVR : FILE -> src/misc/rtc.c, LINE -> 77: Cannot Open Rtc Device Cannot connect with 127.0.0.1 to send log. LIBDVR : Get xmuart Fialed ,xmuart = 1 Listening at port /usr/bin/app.sh9527 is starting ... for debug. ouput high and delay 2000ms usb 1-1: new high-speed USB device number 2 using dwc2 usb 1-1: New USB device found, idVendor=007a, idProduct=8888 usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=0 usb 1-1: Product: AltoBeam_WIFI usb 1-1: Manufacturer: AltoBeam inc. i2c_write timeout 0x2 i2c_write timeout 0x2 i2c_write timeout 0x2 i2c_write timeout 0x2 i2c_write timeout 0x2 IspKo: clean cut! IspKo: set cut 0x0 0xffffff 0x0 0xffffff IspKo: clean cut! IspKo: set cut 0x0 0x780 0x0 0x438 IspKo: clean cut! IspKo: set cut 0x0 0x780 0x0 0x438 cfg80211: Calling CRDA to update world regulatory domain [atbm_log]:atbm_usb_module_init 0 [atbm_log]:SVN_VER=20819,DPLL_CLOCK=2,BUILD_TIME=[===USB-ARES_B== [atbm_log]:Probe called -1 v1 [atbm_log]:not CONFIG_USE_DMA_ADDR_BUFFER [atbm_log]:CONFIG_TX_NO_CONFIRM [atbm_log]:Allocated hw_priv @ c1d38e80 Sofia uses obsolete (PF_INET,SOCK_PACKET) [atbm_log]:atbmwifi INIT_WORK enable [atbm_log]:atbmwifi INIT_WORK enable [atbm_log]:atbm_before_load_firmware++ [atbm_log]:atbm_HwGetChipType, chipver=0x49, g_wifi_chip_type[10] [atbm_log]:+++++++++++++++++1.1v++++++++++++++++++ [atbm_log]:===================~_~==================== [atbm_log]:atbm_start_load_firmware++ [atbm_log]:used firmware.h= [atbm_log]:START DOWNLOAD ICCM========= [atbm_log]:atbm_load_firmware_generic: addr 10000: len 22000 [atbm_log]:START DOWNLOAD DCCM========= [atbm_log]:atbm_load_firmware_generic: addr 800000: len 8000 [atbm_log]:atbm_after_load_firmware++ [atbm_log]:0x1610102c=0x40a0e [atbm_log]:0x1610102c=0x10a0f [atbm_log]:0x16101000=0x8000e08 [atbm_log]:set_block_size=256 [atbm_log]:mdelay wait wsm_startup_done !! [atbm_log]:firmwareCap f58f [atbm_log]:firmwareCap2 51ae [atbm_log]:wsm_caps.firmwareCap 51aef58f [atbm_log]:apollo wifi WSM init done. Input buffers: 32 x 2048 bytes Hardware: 7.1280 WSM firmware [=MODEM=RF=Ares_AX 2GHZ Oct 9 2022 09:54:27NOTXConfrim ap sleep], ver: 15096, build: 2830, api: 1060, cap: 0x51AEF58F Config[30008] expection 900a5c0, ep0 cmd addr 901be2c NumOfStations[8] NumOfInterfaces[3] [atbm_log]:EFUSE(8) [0] [atbm_log]:EFUSE(I) [1] [atbm_log]:EFUSE(B) [0] [atbm_log]:CAPABILITIES_ATBM_PRIVATE_IE [1] [atbm_log]:CAPABILITIES_NVR_IPC [1] [atbm_log]:CAPABILITIES_NO_CONFIRM [1] [atbm_log]:CAPABILITIES_SDIO_PATCH [0] [atbm_log]:CAPABILITIES_NO_BACKOFF [0] [atbm_log]:CAPABILITIES_CFO [0] [atbm_log]:CAPABILITIES_AGC [1] [atbm_log]:CAPABILITIES_TXCAL [1] [atbm_log]:CAPABILITIES_MONITOR [0] [atbm_log]:CAPABILITIES_CUSTOM [1] [atbm_log]:CAPABILITIES_SMARTCONFIG [0] [atbm_log]:CAPABILITIES_ETF [1] [atbm_log]:CAPABILITIES_LMAC_RATECTL [1] [atbm_log]:CAPABILITIES_LMAC_TPC [1] [atbm_log]:CAPABILITIES_LMAC_TEMPC [1] [atbm_log]:CAPABILITIES_CTS_BUG [0] [atbm_log]:CAPABILITIES_USB_RECOVERY_BUG [1] [atbm_log]:CAPABILITIES_USE_IPC [1] [atbm_log]:CAPABILITIES_OUTER_PA [0] [atbm_log]:CAPABILITIES_POWER_CONSUMPTION [1] [atbm_log]:CAPABILITIES_RSSI_DECIDE_TXPOWER [0] [atbm_log]:CAPABILITIES_RTS_LONG_DURATION [1] [atbm_log]:CAPABILITIES_TX_CFO_PPM_CORRECTION[1] [atbm_log]:CAPABILITIES_SHARE_CRYSTAL [0] [atbm_log]:CAPABILITIES_HW_CHECKSUM [0] [atbm_log]:CAPABILITIES_SINGLE_CHANNEL_MULRX [0] [atbm_log]:CAPABILITIES_CFO_DCXO_CORRECTION [1] [atbm_log]:EX_CAPABILITIES_TWO_CHIP_ONE_SOC [0] [atbm_log]:EX_CAPABILITIES_MANUAL_SET_AC [0][atbm_log]:EX_CAPABILITIES_LMAC_BW_CONTROL [1] [atbm_log]:EX_CAPABILITIES_SUPPORT_TWO_ANTENNA [0][atbm_log]:EX_CAPABILITIES_ENABLE_STA_REMAIN_ON_CHANNEL [1] [atbm_log]:EX_CAPABILITIES_ENABLE_PS [0][atbm_log]:EX_CAPABILITIES_TX_REQUEST_FIFO_LINK [0] [atbm_log]:EX_CAPABILITIES_CHIP_TYPE 6032IS [atbm_log]:CONFIG_PRODUCT_TEST_USE_FEATURE_ID [1] [atbm_log]:CONFIG_PRODUCT_TEST_USE_GOLDEN_LED [1] [atbm_log]:wsm_generic_confirm:status(2) [atbm_log]: wsm_write_mib fail !!! mibId=4132 [atbm_log]:apollo wifi : can't open /data/.mac.info [atbm_log]:efuse data is [0x1,0x37,0x1,0x0,0x1,0xf,0x0,0x0,0x90:0x31:0x4b:0x6f:0x43:0x99] [atbm_log]:xm cmd: set_txpwr_and_dcxo,-1,-1,-1,-1,20,20,20,20,20,20 [atbm_log]:apollo wifi : can't open /tmp/set_rate_power.txt [atbm_log]:get chip id [94][1][1] [atbm_log]:current chiptype 6032is [atbm_log]:enable sg [atbm_log]:enable sg [atbm_log]:is registered as 'ALTOBEAM' [atbm_log]:[atbm_wtd]:set wtd_probe = 1 usbcore: registered new interface driver atbm_wlan LibCrypto : g_cryptotype mem= 2, flash CryptoDecrypt,565 or_sel=1 json file /mnt/custom/CustomConfig/Device_3001.json LIBDVR : FILE -> src/init/json.c, LINE -> 154: Get NoEth0 object error! Device: X2-WE; APName: camera_; WifiType: XM713G ;NoEth0: 0 GPIO: AoEn=162,WifiPdn=163,WifiSwitch=255,Key=161,Red=255,Green=255,ethnetphyled=[255, 255], ProductTest=255 Motor: support=1, mirror=0, flip=0, uart=0, at=0 LED: support=1, enable=0 Alarm: innum=0, outnum=1, in=[0,0,0,0,0,0,0,0],out=[91,0,0,0,0,0,0,0] Feed: reckey=255, feedkey=255, motforward=255 motreverse=255 pwrdetect=255 pwrstatus:52~40  Wifiscan: Txpower:0 ********************************************************************** | SYSTEM INFO | ID: 0x3001 | product type: X2-WE | DSP chip: XM530 | wifi type: XM713G ********************************************************************** LIBDVR: Complied at Jun 17 2023 14:27:18 GIT:552bb59 start XM713G_TB wlandaemon /mnt/mtd/Log/WifiStartupType doesn't exists! init args 0 1 2 0 g_wifiState.TxPower:0 SetWlanState wifi state 0 [atbm_log]:br0_netdev_open()-1199: dev_get_by_name(br0) [atbm_log]:ieee80211_prep_hw_scan:n_chans(14),space(20),index(0),scaned(14) [atbm_log]:atbm_hw_scan:if_id(0) [atbm_log]:atbm_hw_scan:scan, delay suspend [atbm_log]:scan start band(0),(14) [atbm_log]:hw_priv->scan.status 0 [atbm_log]:atbm_scan_work:end(0) [atbm_log]:ieee80211_prep_hw_scan:n_chans(6),space(6),index(20),scaned(20) [atbm_log]:atbm_hw_scan:if_id(0) [atbm_log]:atbm_hw_scan:scan, delay suspend [atbm_log]:__ieee80211_scan_completed:1512 [atbm_log]:scan start band(1),(6) [atbm_log]:hw_priv->scan.status 0 [atbm_log]:atbm_scan_work:end(0) Msg Len = 40960 Msg Len = 40956 enter into saveInfo XX:XX:XX:XX:XX:XX channel = 13 rssi = 72 2472 1 insertList ssid[] headMode! Msg Len = 39434 end parseScanInfo 01 02 03 04 05 06 07 08 09 10 11 12 13 14 36 38 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00[atbm_log]:eth3:free authen bss ++ 00 00 [atbm_log]:eth3:free authen bss ++ [atbm_log]:ieee80211_sdata_uninit:listen_sdata( (null)) [atbm_log]:add iftype(6),if_cnt(1),flags( (null)) [atbm_log]:enable sg [atbm_log]:br0_netdev_open()-1199: dev_get_by_name(br0) Login timed out Auto login as root ... (none) login: