hi3516cv300 System startup


U-Boot 2010.06-svn1098 (Jun 11 2018 - 13:17:42)

Check Flash Memory Controller v100 ... Found
SPI Nor(cs 0) ID: 0x20 0x70 0x17
Block:64KB Chip:8MB Name:"XM25Q64AHIG"
CONFIG_CLOSE_SPI_8PIN_4IO = y.
at hifmc100_setTB() sr: 0x8 <<111>>.
lk[8 => 0x800000]
SPI Nor total size: 8MB
MMC:   
EMMC/MMC/SD controller initialization.
Card did not respond to voltage select!
No EMMC/MMC/SD device found !
In:    serial
Out:   serial
Err:   serial
Press Ctrl+C to stop autoboot
8192 KiB hi_fmc at 0:0 is now current device

srcAddr 0x83000000, dstAddr 0x82000000
created_inode 0x883d0200
find_squashfs_file: name bin, start_block 0, offset 2518, type 1
find_squashfs_file: name boot, start_block 0, offset 2618, type 1
read inode: name boot, sb 0, of 2618, type 1
find_squashfs_file: name uImage, start_block 0, offset 2550, type 2
read inode: name uImage, sb 0, of 2550, type 2
write_file: regular file, blocks 9
len 2161187
### FS load complete: 2161187 bytes loaded to 0x82000000
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   Linux-3.18.20
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2161123 Bytes = 2.1 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Loading Kernel Image ... OK
OK

Starting kernel ...