SigmaStar SSC323
安装指南
请在右侧输入摄像机配置，然后点击“生成安装指南”按钮。在下一页中，您将找到二进制文件和在摄像机上安装 OpenIPC 固件时必须执行的命令。
保存您的原始固件！
请不要忽视这部分。您可能认为没有必要，但我们向您保证，仍然需要原始固件来恢复丢失的设置、驱动程序，并且用来进一步研究。
社区对 SSC323 的了解
摘自 Tino Darkness 在 OpenIPC Telegram 群组中的消息。每一条都链接到其出处消息。
- After Viktor reported SSC323's chip ID as 0xF2 (I6B0), Tino said the Ispahan (SSC335) build should work on SSC323. (消息 1)
- SSC323 looks like I6B0, similar to SSC335 but earlier. (消息 1)
- (Infinity6 family) In u-boot, md.b 0x3fe0 0x20 (or md.b 0x7fe0 0x20) reads the actual tag with the real SoC family from the SoC (isptool reads the same tag from Linux); MVX1##I6gf74c9b5CMN_ROM######XVM indicates an I6, while the MVX4##I6b0...IPL_ tag in the flash dump comes from the SDK. (消息 1)
- (Infinity6 family) I6 (Macaron SDK) and I6B0 (Ispahan SDK) are quite similar, so I6B0 binaries should work on I6 in most cases. (消息 1)
- (Infinity6 family) The Infinity6 SDK codename is Macaron (demo code dir hoth). (消息 1, 消息 2)
- (Infinity6 family) SigmaStar chips can boot from SPI NOR/NAND, SLC NAND, UART, eMMC, SDIO 3.0 (SD card) and USB, at least on Mercury5, so Tino infers Infinity6 can too. However, he does not know whether SD boot works on I6 and it may be impractical; he has only seen I6 chips boot from NOR, NAND and eMMC. (消息 1, 消息 2)