IVG-N4-2LQ
8.0M Low-light H.265 Smart Dual-lens Wired PTZ Dome Module · Dual-lens Camera Module
- Maker:
- Xiongmai
- Listed:
- 2022
Xiongmai
8.0M Low-light H.265 Smart Dual-lens Wired PTZ Dome Module
Features
- Support face detection, human detection; other intelligent functions available on request
- Support dual-lens 8x hybrid zoom
- Support picture-in-picture display
- 8.0MP resolution, low light, clear and fine images
- Support 2D/3D noise reduction, digital WDR
- Advanced H.265AI (compatible with H.265/H.264) video compression, ultra-low bitrate, HD image quality
- Lightning protection, compliant with GB/T17626.5 and IEC61000-4-5
- Support ONVIF, connects to third-party NVRs/platforms; mobile monitoring (iOS, Android)
- Support web client, CMS, MYEYE central management platform; SDK available
- Support cloud technologies: NAT traversal, NVR-camera pairing, alarm push notifications to phones
| Specifications | IVG-N4-2LQ |
|---|---|
| System architecture | Embedded RTOS, dual-core 32-bit DSP (NT98566), pure hardware compression, watchdog |
| Sensor | 2 × 4.0M 1/3" SC401AI low-light CMOS sensors; color 0.01Lux@F1.2, black/white 0.001Lux@F1.2 |
| Video processing | H.265 (compatible with H.265/H.264) encoding, dual stream, AVI format; bitrate 0.1M~10Mbps adjustable; frame rate 1~30 fps adjustable |
| Video output | Main stream: 2560*1440@25fps, 2304*1296@25fps, 1920*1080@25fps; sub-stream: 800*448@25fps |
| Shutter | 1/50 (1/60) s to 1/10000 s |
| Lens | None |
| Day/night mode | Support IR-CUT; IR-CUT coil resistance 20Ω, drive current under 200mA, voltage 3.5V-6V |
| Noise reduction | Support 2D/3D noise reduction |
| WDR | Support digital WDR |
| Auto iris | None |
| Audio processing | G.711A codec, supports audio/video synchronization |
| Audio interface | 1ch input, level 2Vp-p, impedance 1kΩ, supports pickup input; 1ch output, impedance 16Ω, 30mW output power, supports headphones or amplifier |
| Network interface | 1*RJ45 Ethernet port, 10/100M adaptive; supports RTSP/FTP/DHCP/NTP/UPnP and other network protocols (combined with power connector) |
| Expansion interface | None |
| Signal interface | 1 photoresistor interface, 1 IR-CUT driver interface; photoresistor input linked with IR-CUT and IR LEDs |
| PTZ interface | One horizontal motor interface, one vertical motor interface |
| Motor interface | None |
| Alarm I/O | None |
| WIFI antenna connector | None |
| Reset button interface | Support one-key reset |
| SD card | Local TF card, up to 128G |
| Reliability | Full lightning protection, meets national and international standards; stable and reliable in 7*24h -10℃~65℃ high-temperature testing (including complete-unit testing) |
| Intelligent analysis | Support human detection, face detection; other intelligent functions available on request |
| Service functions | Support web configuration, OSD, motion detection; alarm-center notification and screen pop-up on motion alarm; FTP snapshots; client remote monitoring software, MYEYE platform and other applications; complete SDK |
| ONVIF protocol | Supported |
| Mobile monitoring | Support mobile monitoring (iOS, Android) |
| Power supply | Power: DC12V/2A, consumption: ≤3W |
| Board dimensions | 52mm*64mm+41mm*20mm |
| Description | Support PoE power (optional); LED board drive voltage 3.3V |
Photos
Files
- IVG-N4-2LQ-pinout-1.png (pinout, 93 KB)
- IVG-N4-2LQ-pinout-2.png (pinout, 222 KB)
- IVG-N4-2LQ-pinout-3.png (pinout, 95 KB)
- IVG-N4-2LQ-interface-zh.pdf (document, 373 KB)
- IVG-N4-2LQ-parameters.pdf (document, 604 KB)
