LPG-G2
2.0M Low-power IP Camera Module · IP Camera Module
- Maker:
- Xiongmai
- SoC:
- HI3518EV200
- Sensor:
- SC2235
- Listed:
- 2018
Xiongmai
2.0M Low-power IP Camera Module
Features
- 1080P HD resolution, clear and fine images
- Operating current as low as 450uA
- Support 2D/3D noise reduction, digital WDR
- Lightning protection, compliant with GB/T17626.5 and IEC61000-4-5
- Support mobile monitoring (iOS, Android)
- Support web client, CMS, MYEYE central management platform; SDK available
- Support cloud technologies: NAT traversal, NVR-camera pairing, alarm push notifications to phones
| Specifications | LPG-G2 |
|---|---|
| System architecture | Embedded RTOS, dual-core 32-bit DSP (Hi3518EV200), pure hardware compression, watchdog |
| Sensor | 2.0M 1/2.7" SC2235 CMOS sensor; color 0.1Lux@F1.2, black/white 0.01Lux@F1.2 |
| Video processing | H.264/H.265X video encoding, dual stream, AVI format; bitrate 0.1M~6Mbps adjustable; frame rate 1~30 fps adjustable |
| Video output | Main stream: 1960*1080@25fps; sub-stream: 1280*720@25fps |
| Shutter | 1/50 (1/60) s to 1/10000 s |
| Lens | None |
| Day/night mode | Support IR-CUT |
| Noise reduction | Support 2D/3D noise reduction |
| WDR | Support digital WDR |
| Auto iris | None |
| Audio processing | G.711A codec, supports two-way audio intercom and audio/video synchronization |
| Audio interface | 1ch input, level 2Vp-p, impedance 1kΩ, pickup input; 1ch output, impedance 16Ω, 30mW output power, for headphones or amplifier |
| Network interface | None |
| Expansion interface | None |
| Signal interface | Built-in IR LEDs and photosensor |
| PTZ interface | None |
| Motor interface | One horizontal motor interface, one vertical motor interface |
| Alarm I/O | None |
| WIFI antenna connector | 1 WIFI antenna connector, supports wireless network connection, one-key WPS |
| Reset button interface | Support one-key reset |
| SD card | Supported |
| Reliability | Full lightning protection, meets national and international standards; stable and reliable in 7*24h 65℃ high-temperature testing (including complete-unit testing) |
| Intelligent analysis | Not supported |
| Service functions | Support web configuration, OSD, PIR motion detection; alarm-center notification and screen pop-up on PIR alarm; MJPEG snapshots; client remote monitoring software, SuperLook platform and other applications; complete mobile SDK |
| ONVIF protocol | Supported |
| Mobile monitoring | Support mobile monitoring (iOS, Android) |
| Power supply | Less than DC5V |
| Power consumption | 450uA |
| Board dimensions | 38 universal form factor |
| Description | No customization available at present |
Photos
Files
- LPG-G2-pinout-1.png (pinout, 320 KB)
- LPG-G2-pinout-2.png (pinout, 121 KB)
- LPG-G2-pinout-3.png (pinout, 139 KB)
- LPG-G2-interface-zh.docx (document, 365 KB)
- LPG-G2-interface-zh.pdf (document, 484 KB)
- LPG-G2-parameters.doc (document, 712 KB)
- LPG-G2-parameters.pdf (document, 209 KB)
