XM-ZH-308
2.0M Panoramic Bulb Camera Module (white-light version) · Panoramic VR
- Maker:
- Xiongmai
- SoC:
- XM510
- Sensor:
- SC2235P
- Listed:
- 2018
Xiongmai
2.0M Panoramic Bulb Camera Module (white-light version)
Features
- 2.0M HD resolution, clear and fine images
- Support wireless network connection, one-key WPS
- Support Micro SD card
- Support 2D/3D noise reduction, digital WDR
- Advanced H.264 video compression, ultra-low bitrate, HD image quality
- Lightning protection, compliant with GB/T17626.5 and IEC61000-4-5
- Support mobile monitoring (iOS, Android)
- Support web client, CMS; SDK available
- Support cloud technologies: NAT traversal, NVR-camera pairing, alarm push notifications to phones
| Specifications | IPG-50X20PS-WFA(L) |
|---|---|
| System architecture | Embedded RTOS, dual-core 32-bit DSP (XM510), pure hardware compression, watchdog |
| Sensor | 2.0M 1/2.9" SC2235P CMOS sensor; color 0.1Lux@F1.2, black/white 0.01Lux@F1.2 |
| Video processing | H.264 encoding, dual stream, AVI format; bitrate 0.1M~8Mbps adjustable |
| Video output | Main stream: 1080*1080@15fps; sub-stream: 704*576@15fps |
| Shutter | 1/50 (1/60) s to 1/10000 s |
| Lens | None |
| Day/night mode | Support IR-CUT |
| Noise reduction | Support 2D/3D noise reduction |
| WDR | Support digital WDR |
| Auto iris | None |
| Audio processing | G.711A codec, supports two-way audio intercom and audio/video synchronization |
| Audio interface | 1ch input, level 2Vp-p, impedance 1kΩ, pickup input; 1ch output, impedance 16Ω, 30mW output power, for headphones or amplifier |
| Network interface | None |
| Expansion interface | None |
| Signal interface | 1 IR-CUT driver interface |
| PTZ interface | None |
| Motor interface | None |
| Alarm I/O | None |
| WIFI antenna connector | 1 WIFI antenna connector, supports wireless network connection, one-key WPS |
| Reset button interface | Support one-key reset |
| SD card | Supported |
| Reliability | Full lightning protection, meets national and international standards; stable and reliable in 7*24h 65℃ high-temperature testing (including complete-unit testing) |
| Intelligent analysis | Not supported |
| Service functions | Support web configuration, OSD, motion detection; alarm-center notification and screen pop-up on motion alarm; MJPEG snapshots; client remote monitoring software, MYEYE platform and other applications; complete SDK |
| ONVIF protocol | Available on request |
| Mobile monitoring | Support mobile monitoring (iOS, Android) |
| Power supply | Power: DC5V |
| Board dimensions | Dimensions: round board Φ=60mm |
| Description | Support PoE power (optional); one-key reset not supported |
