- Recommended
- Find by board or camera
- Sensors
- Allwinner 0
- Ambarella 0
- Anyka 0
- Fullhan 2
- Goke 12
- GrainMedia 2
- HiSilicon 22
- Ingenic 17
- MStar 0
- Novatek 2
- Rockchip 2
- SigmaStar 15
- TI 0
- Xiongmai 3
- Full list
The number beside a chip maker counts its chips you can install today.
onsemi AR0130
Aptina · NIR-enhanced · 1.2 MP · 1/3″ Discontinued
1.2 MP sensor with large 3.75 µm pixels tuned for near-infrared, the standard 960p sensor of early HD IP cameras; also made in monochrome.
- Resolution
- 1280 × 960
- MP
- 1.2 MP
- Pixel
- 3.75 µm
- Format
- 1/3″
- Shutter
- Rolling
- Colour filter
- Bayer RGB
- Sensitivity
- 5,500 mV/lux·s — 550 nm
- Sensitivity per µm²
- 391 mV/lux·s/µm²
- SNR max
- 44 dB
- Dynamic range
- 83.5 dB
- Max fps
- 45 fps
- ADC
- 12-bit
- Interfaces
- HiSPi, DVP
- Line
- Aptina
- Kind
- NIR-enhanced
- Released
- ≈2011 (from the earliest datasheet we have seen)
- Status
- Discontinued
- Also known as
- AR0130CS, AR0130CSSC00SPCA0
Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.
Published by the maker: onsemi.com
NIR-enhanced · ≤1.5 MP
Have a camera with this sensor? Send us its board.