- Recommended
- Find by board or camera
- Sensors
- Allwinner 0
- Ambarella 0
- Anyka 0
- Fullhan 2
- Goke 12
- GrainMedia 2
- HiSilicon 22
- Ingenic 17
- MStar 0
- Novatek 2
- Rockchip 2
- SigmaStar 15
- TI 0
- Xiongmai 3
- Full list
The number beside a chip maker counts its chips you can install today.
Brigates BG0806
Low light · 2.1 MP · 1/2.7″ Unknown
A 1080p sensor with 3 µm pixels used in budget analogue-HD and Ingenic IP cameras; MIPI is a single lane.
- Succeeded by Brigates BG0836
- Resolution
- 1928 × 1088
- MP
- 2.1 MP
- Pixel
- 3 µm
- Format
- 1/2.7″
- Shutter
- Rolling
- Colour filter
- Bayer RGB
- Sensitivity
- 3,800 mV/lux·s — 550 nm
- Sensitivity per µm²
- 422 mV/lux·s/µm²
- SNR max
- 36 dB
- Dynamic range
- 65 dB
- Dark current
- 10 mV/s — 60 °C
- Max fps
- 30 fps
- Interfaces
- DVP, MIPI CSI-2
- Kind
- Low light
- Released
- ≈2016 (estimated from its line)
- Status
- Unknown
Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.
Low light · 2 MP
Have a camera with this sensor? Send us its board.