- Recommended
- Find by board or camera
- Sensors
- Allwinner 0
- Ambarella 0
- Anyka 0
- Fullhan 2
- Goke 12
- GrainMedia 2
- HiSilicon 22
- Ingenic 17
- MStar 0
- Novatek 2
- Rockchip 2
- SigmaStar 15
- TI 0
- Xiongmai 3
- Full list
The number beside a chip maker counts its chips you can install today.
GalaxyCore GC2093
Non-mobile CIS · Standard · 2.1 MP · 1/2.9″ Unknown
A 1080p sensor with two-exposure staggered HDR and 60 fps, aimed at IP cameras, doorbells and battery cameras.
- Resolution
- 1920 × 1080
- MP
- 2.1 MP
- Pixel
- 2.8 µm
- Format
- 1/2.9″
- Shutter
- Rolling
- Colour filter
- Bayer RGB
- Sensitivity
- 3,900 mV/lux·s
- Sensitivity per µm²
- 497 mV/lux·s/µm²
- SNR max
- 38 dB
- Dynamic range
- 81 dB
- Dynamic range, HDR
- 105 dB
- HDR
- Staggered
- Max fps
- 60 fps
- ADC
- 10-bit
- Interfaces
- DVP, MIPI CSI-2
- Line
- Non-mobile CIS
- Kind
- Standard
- Released
- ≈2020-08 (from the earliest datasheet we have seen)
- Status
- Unknown
- Also known as
- GC2093-C47YA
Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.
Published by the maker: web.archive.org
Standard · 2 MP
Have a camera with this sensor? Send us its board.