Skip to content

The number beside a chip maker counts its chips you can install today.

All sensors

ImageDesign MIS2008

MIS · Standard · 2.1 MP · 1/2.9″ Discontinued

2 MP MIPI-only sensor with master/slave sync, no longer in the maker's lineup. Drivers read the same chip ID (0x2008) as MIS2009, so software cannot tell the two apart.

Resolution
1936 × 1096
MP
2.1 MP
Pixel
2.79 µm
Format
1/2.9″
Shutter
Rolling
Colour filter
Bayer RGB
Sensitivity
4,000 mV/lux·s — 540 nm
Sensitivity per µm²
514 mV/lux·s/µm²
SNR max
39 dB
Dynamic range
72 dB
Max fps
60 fps
ADC
12-bit
Interfaces
MIPI CSI-2
Line
MIS
Kind
Standard
Released
≈2021 (from the earliest datasheet we have seen)
Status
Discontinued

Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.

Standard · 2 MP

Compare →

Have a camera with this sensor? Send us its board.