- Recommended
- Find by board or camera
- Sensors
- Allwinner 0
- Ambarella 0
- Anyka 0
- Fullhan 2
- Goke 12
- GrainMedia 2
- HiSilicon 22
- Ingenic 17
- MStar 0
- Novatek 2
- Rockchip 2
- SigmaStar 15
- TI 0
- Xiongmai 3
- Full list
The number beside a chip maker counts its chips you can install today.
ImageDesign MIS5001
MIS · Standard · 5.1 MP · 1/2.7″
Linear 5 MP sensor with DVP and 4-lane MIPI. It reports the same chip ID as MIS4001.
- Resolution
- 2616 × 1958
- MP
- 5.1 MP
- Pixel
- 2 µm
- Format
- 1/2.7″
- Shutter
- Rolling
- Colour filter
- Bayer RGB
- Sensitivity
- 2,500 mV/lux·s — 540 nm
- Sensitivity per µm²
- 625 mV/lux·s/µm²
- SNR max
- 39.5 dB
- Dynamic range
- 74 dB
- Max fps
- 30 fps
- ADC
- 12-bit
- Interfaces
- MIPI CSI-2, DVP
- Line
- MIS
- Kind
- Standard
- Released
- ≈2020 (from the earliest datasheet we have seen)
- Status
- In production
Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.
Published by the maker: imgds.com
Standard · 5 MP
Have a camera with this sensor? Send us its board.