- Recommended
- Find by board or camera
- Sensors
- Allwinner 0
- Ambarella 0
- Anyka 0
- Fullhan 2
- Goke 12
- GrainMedia 2
- HiSilicon 22
- Ingenic 17
- MStar 0
- Novatek 2
- Rockchip 2
- SigmaStar 15
- TI 0
- Xiongmai 3
- Full list
The number beside a chip maker counts its chips you can install today.
SmartSens SC132GS
SmartGS · Global shutter · 1.4 MP · 1/4″
Portrait 1080x1280 stacked-BSI global-shutter sensor, QE above 40% at 940 nm; common in face-recognition and depth modules.
- Resolution
- 1080 × 1280
- MP
- 1.4 MP
- Pixel
- 2.7 µm
- Format
- 1/4″
- Shutter
- Global
- Sensitivity
- 8,250 mV/lux·s — mono; 7120 colour
- Sensitivity per µm²
- 1,132 mV/lux·s/µm²
- Saturation
- 9,000 e-
- SNR max
- 40 dB
- Dynamic range
- 66 dB
- Dynamic range, HDR
- 100 dB
- HDR
- Mode not stated
- Max fps
- 120 fps
- Interfaces
- MIPI CSI-2, LVDS
- Line
- SmartGS
- Kind
- Global shutter
- Released
- ≈2018-07 (from the earliest datasheet we have seen)
- Status
- In production
Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.
Published by the maker: smartsenstech.com
Global shutter · ≤1.5 MP
Have a camera with this sensor? Send us its board.