Skip to content

The number beside a chip maker counts its chips you can install today.

IPG-53H13PE-S

1.3M Network Camera Module(Hi3518E) · IP Camera Module

Maker:
Xiongmai
Sensor:
ar0130
Device IDs:
00006531
Listed:
2016

cctvsp.ru

IP camera module IPG-53H13PE-S (Hi3518e + ar0130)

2MP IP camera module. 1/3'' Aptina AR0130 CMOS Image Sensor, HiSilicon Hi3518e 720p IP Cam SoC, resolution 1280x960 at 17 fps. Used in general-purpose outdoor and indoor cameras; has acceptable characteristics when shooting night-time video. This is a single-board module with standard 38x38 mm dimensions, used in cameras with standard mounting positions.

Note: this module has been discontinued; the recommended replacement model is IPG-HP201A-S-F36, with the newer 2MP AR0237 sensor and a Hi3516D SoC with h265 support.

Specifications
Sensor1/3'' Aptina AR0130
Resolution1.3Mp (1280x960)
SensitivityDay 0.01 lux / night 0.001 lux (F1.2) / 0 lux with IR
SoCHiSilicon Hi3518E 720p IP-Cam SOC

Xiongmai

1.3M Network Camera Module(Hi3518E)

Features

  • 1/3” AR0130 Ultra low illumination cmos sensor
  • Main stream:1280*960(18fps),1280*720(25fps); sub-stream:704*576
  • Support 3D DNR, DWDR
  • Support ONVIF;Support Third-party NVR
  • Support for mobile video surveillance(iOS,android)
  • Support Web, CMS, platform management software MYEYE,Provide SDK
  • Support cloud service, network penetration, alarm information pushed to phone ,etc.
Specifications
SpecificationsIPG-53H13PE-S
System StructureEmbedded RTOS design, dual-core 32-bit DSP (Hi3518E), pure hardware compression, watchdog;
Sensor1.3M 1/3 "AR0130 CMOS sensor;
IlluminationColor 0.01Lux @F1.2; B&W 0.001Lux@F1.2
Video compressionH.264, support dual-stream, AVI format; support stream 0.1M ~ 6Mpbs adjustable; support frame rate from 1 to 25 frames / sec adjustable;
Image outputmain stream:1280*960(18fps),1280*720(25fps); sub-stream:704*576;
Network connection1 RJ45, 10/100M Ethernet adaptive interface; support RTSP / FTP / PPPOE / DHCP / DDNS / NTP / UPnP network protocols;
Other interface1 external single, 1 IR-CUT, support photo resistor input signal and image, IR-CUT, infrared light linkage;
Lightning ProtectionPower, network, POE comprehensive lightning protection, in line with national standards GB/T17626.5, the international standard IEC61000-4-5.
featuresSupport WEB configure, support for OSD, support real-time video transmission, support mobile surveillance, support for mobile detection alarm center after the screen pop-up reminders and linkage; supports JPEG capture; support unified client remote monitoring software, MYEYE platform system applications; provide perfect the SDK development package;
ONVIFsupport
Mobile monitoringSupport mobile monitoring(iPhone,Windows Mobile,BlackBerry,Symbian,Android)
PowerDC 12V
dimension38mm*38mm
directionsSupport POE power supply (optional),-S is neutral generic version, does not accept any custom

Photos

  • photo of IPG-53H13PE-S
  • front of IPG-53H13PE-S

Files

Links

All camera boards