- Recommended
- Find by board or camera
- Sensors
- Allwinner 0
- Ambarella 0
- Anyka 0
- Fullhan 2
- Goke 12
- GrainMedia 2
- HiSilicon 22
- Ingenic 17
- MStar 0
- Novatek 2
- Rockchip 2
- SigmaStar 15
- TI 0
- Xiongmai 3
- Full list
The number beside a chip maker counts its chips you can install today.
ImageDesign MIS20S1
MIS · NIR-enhanced · 2.1 MP · 1/2.8″
High-sensitivity 2 MP sensor with NIR enhancement and an always-on-video (AOV) low-power mode, for battery and colour-at-night cameras.
- Resolution
- 1928 × 1088
- MP
- 2.1 MP
- Pixel
- 2.9 µm
- Format
- 1/2.8″
- Shutter
- Rolling
- Colour filter
- Bayer RGB
- Sensitivity
- 13,800 mV/lux·s
- Sensitivity per µm²
- 1,641 mV/lux·s/µm²
- SNR max
- 43 dB
- Max fps
- 60 fps
- Interfaces
- MIPI CSI-2
- Line
- MIS
- Kind
- NIR-enhanced
- Released
- 2024-12 (announced)
- Status
- In production
Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.
Published by the maker: imgds.com, imgds.com
NIR-enhanced · 2 MP
Have a camera with this sensor? Send us its board.