- Recommended
- Find by board or camera
- Sensors
- Allwinner 0
- Ambarella 0
- Anyka 0
- Fullhan 2
- Goke 12
- GrainMedia 2
- HiSilicon 22
- Ingenic 17
- MStar 0
- Novatek 2
- Rockchip 2
- SigmaStar 15
- TI 0
- Xiongmai 3
- Full list
The number beside a chip maker counts its chips you can install today.
SmartSens SC230AI
AI Series (SmartClarity-2) · NIR-enhanced · 2.1 MP · 1/2.8″
1080p BSI sensor with NIR+ (QE 36% at 850 nm at launch) and PixGain dual-gain HDR.
- Resolution
- 1928 × 1088
- MP
- 2.1 MP
- Pixel
- 2.9 µm
- Format
- 1/2.8″
- Shutter
- Rolling
- Colour filter
- Bayer RGB
- Sensitivity
- 7,341 mV/lux·s
- Sensitivity per µm²
- 873 mV/lux·s/µm²
- SNR max
- 42 dB
- Dynamic range
- 86 dB
- Dynamic range, HDR
- 100 dB
- HDR
- Staggered, DCG
- Max fps
- 60 fps
- Interfaces
- MIPI CSI-2, DVP
- Line
- AI Series (SmartClarity-2)
- Kind
- NIR-enhanced
- Released
- 2021-06 (announced)
- Status
- In production
Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.
Published by the maker: smartsenstech.com, smartsenstech.com
NIR-enhanced · 2 MP
Have a camera with this sensor? Send us its board.