- Recommended
- Find by board or camera
- Sensors
- Allwinner 0
- Ambarella 0
- Anyka 0
- Fullhan 2
- Goke 12
- GrainMedia 2
- HiSilicon 22
- Ingenic 17
- MStar 0
- Novatek 2
- Rockchip 2
- SigmaStar 15
- TI 0
- Xiongmai 3
- Full list
The number beside a chip maker counts its chips you can install today.
ImageDesign MIS40C1
MIS · Standard · 3.7 MP · 1/3″
4 MP sensor with a wide single-exposure dynamic range, for consumer cameras and driver assistance.
- Resolution
- 2560 × 1440
- MP
- 3.7 MP
- Pixel
- 2 µm
- Format
- 1/3″
- Shutter
- Rolling
- Colour filter
- Bayer RGB
- Sensitivity
- 2,800 mV/lux·s
- Sensitivity per µm²
- 700 mV/lux·s/µm²
- SNR max
- 39 dB
- Dynamic range
- 79 dB
- Max fps
- 30 fps
- Interfaces
- MIPI CSI-2
- Line
- MIS
- Kind
- Standard
- Released
- 2024-03 (announced)
- Status
- In production
Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.
Published by the maker: imgds.com, imgds.com
Standard · 4 MP
Have a camera with this sensor? Send us its board.