- Recommended
- Find by board or camera
- Sensors
- Allwinner 0
- Ambarella 0
- Anyka 0
- Fullhan 2
- Goke 12
- GrainMedia 2
- HiSilicon 22
- Ingenic 17
- MStar 0
- Novatek 2
- Rockchip 2
- SigmaStar 15
- TI 0
- Xiongmai 3
- Full list
The number beside a chip maker counts its chips you can install today.
PrimeSensor PS5416
PrimeSensor · Standard · 4.1 MP · 1/3″
A 4-megapixel ultra-low-power sensor with a pre-roll mode, motion detection and PIR input, made for battery cameras and doorbells.
- Resolution
- 2688 × 1520
- MP
- 4.1 MP
- Pixel
- 1.98 µm
- Format
- 1/3″
- Shutter
- Rolling
- Colour filter
- Bayer RGB
- HDR
- DOL
- Max fps
- 30 fps
- Interfaces
- MIPI CSI-2, DVP
- Line
- PrimeSensor
- Kind
- Standard
- Released
- ≈2024 (estimated from its line)
- Status
- In production
- Also known as
- PS5416LT
Sensitivity is as the maker states it, and makers measure it differently (exposure, aperture, light source, bit depth): compare like units only. Per µm² divides it by the pixel area, which is most of what a raw figure says. Numbers are the makers' own, from their specifications; we do not host datasheets. Links go to what the maker published.
Published by the maker: pixart.com
Standard · 4 MP
Have a camera with this sensor? Send us its board.